2-in-1 Hasken Haske na Haske Vs Rarrabe Matsaloli: Takamaiman Jagora ga Masu Rarraba

Idan kuna gina fakitin rufin kasuwanci don abokin ciniki a Saudi Arabiya, tabbas kun ga tashin hankali iri ɗaya akan kowane aikin: masu zanen hasken wuta suna son haske mai haske (na yanayi + lafazi), yayin da masu sakawa da masu siye ke son ƙarancin yankewa, ƙarancin kewayawa, da ƙarancin abubuwan da zasu iya yin kuskure.

Shi ya sa 2-in-1 saman da aka ɗora tabo + na'urorin hasken wuta suna samun kulawa. Maimakon shigar da grid downlight da keɓantaccen tsarin hasken haske, luminaire ɗaya yana haɗa haske na tsakiya tare da kewaye da hasken salon haskakawa.

Wannan labarin yana taimaka wa masu rarrabawa da masu siye da ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aikin hasken haske na 2-in-1 akan tsarin al'ada: raba hasken wuta + raba hasken wuta . Babu talla-kawai tsarin yanke shawara da za ku iya amfani da shi akan zance na gaba.

1. Saurin kwatanta matrix: 2-in-1 downlight Haske vs raba kayan aiki

Wannan jagora ce mai amfani ga takamaiman masu siye da masu rarrabawa waɗanda ke buƙatar faɗaɗa cikin sauri, rage haɗarin shigarwa, kuma har yanzu suna sadar da 'hasken mai rufi' masu zanen kaya-ba tare da ƙara ƙarin aikin daidaita rufin ba.

2. Abin da 2-in-1 ya canza a cikin ayyukan gaske

Fitilar 2-in-1 shine ainihin gajeriyar hanyar haske mai rufi': tsakiyar tsakiyar haske don cika gabaɗaya da abin da ke kewaye da abin gani/tabo don naushi.

A cikin ra'ayin samfur naku, hasken ƙasa yana a tsakiya , kuma mai nunin hexagonal yana lullube shi. Ainihin tambaya ba shine ko ra'ayin yana da wayo ba - shine ko yana magance ciwon kai na yau da kullun da abokin ciniki ke ji a zahiri: maki da yawa na rufi don daidaitawa, dama da yawa don kuskuren wayoyi, da yawa 'ya yi kyau akan takarda' abubuwan mamaki yayin ƙaddamarwa.

Maɓallin Takeaway : Mafi kyawun zaɓi shine ƙasa game da 'wane kayan aiki ne mafi kyau,' da ƙari game da ko aikin yana buƙatar kulawa mai zaman kanta na yanayi da hasken lafazin-da kuma yawan haɗarin da kuke son ɗauka a lokacin shigarwa, sake yin aiki, da gunaguni na mai amfani na ƙarshe idan yanayin sarrafawa bai dace da ƙayyadaddun bayanai ba.

3. Ma'auni na kimantawa 1: Ƙaƙwalwar katako da sarrafa tazara

Masu saye sukan fara da zaɓin kusurwar katako don fitilun ƙasa da fitillu saboda yana shafar daidaituwa, naushi, da adadin kayan gyara da kuke buƙata.

Yawancin kwatancen suna farawa a nan don dalili: kusurwar katako yana nuna ko sarari yana jin haske daidai ko cike da wurare masu zafi.

Jagoranci na yau da kullun shine cewa an tsara fitilun ƙasa don rarrabuwa mai faɗi, yayin da an tsara fitilun tabo don kunkuntar katako mai ƙarfi. Misali, SunroLEDs suna bayyana fitilun tabo kamar sau da yawa suna amfani da kunkuntar katako (kimanin 8° – 45°) da fitilun ƙasa kamar amfani da filaye masu faɗi (sau da yawa a kusa da 60° – 120°) a cikin sa. Kwatancen LED Spotlight vs Downlight.

3.1 Lokacin da 2-in-1 ke son yin nasara

• Kuna son daidaitaccen shimfidar rufin rufin mai maimaitawa.

• Bukatar 'lafazin' tana da matsakaici (misali, ƙara zurfin sararin samaniya maimakon haskaka wani takamaiman abu).

• Kun fi son zaɓi daga ƙaramin saitin zaɓuɓɓukan katako maimakon zayyana yadudduka daban-daban na haske.

3.2 Lokacin da gyare-gyare daban-daban sukan yi nasara

• Maƙasudin lafazin suna motsawa (nuni-nuna tallace-tallace, tallace-tallace na yanayi).

• Kuna buƙatar iyalai na katako daban-daban a cikin yanki ɗaya (faɗin yanayi + kunkuntar manyan bayanai).

• Kuna son haɓaka tazara da yin niyya kai tsaye.

Bayanin Radians Lighting akan Rukunin kusurwar kusurwa don fitilun ƙasa da fitilun tabo wata tunatarwa ce mai fa'ida: da zarar kuna haɗawa 'faɗin yanayi' da ' kunkuntar lafazi ', ɓangarorin maɓalli daban-daban suna sauƙaƙa don kiyaye kowace rawa tana aikinta.

4. Ma'auni na kimantawa 2: Waya, yanki, da dabaru masu sarrafawa

Wannan shine inda yanke shawara ta zama ainihin 'hasken haske vs Haske (kasuwa)': gyare-gyare daban-daban na iya ba ku tsaftataccen yanki, amma kuma suna haifar da ƙarin wuraren rufi da ƙarin aikin daidaitawa.

Masu rarrabawa sukan gano a ƙarshen aikin cewa 'daidaitacce iri ɗaya' ba koyaushe yana nufin 'sarrafa ɗaya ba.' Abin da ke da mahimmanci shine yankuna nawa na haske da sararin samaniya ke buƙata.

4.1 2-in-1: ƙananan na'urori, amma duba yadda ake aiwatar da hanyoyi

Ra'ayin ku yana goyan bayan:

• Ikon sarrafawa biyu

• Dual CCT (misali, 3000K / 4000K / 6500K)

• Tasirin haske/hanyoyi guda uku

• Ikon gudanar da tasirin duka biyu tare ko ɗaya kawai

Wannan yana da kyau idan mai siye yana son sassauƙan nau'in 'saitin kamanni' ba tare da ƙaddamar da tsarin sarrafawa mai rikitarwa ba.

Abin da ya kamata ka tabbatar kafin kayyade:

• An zaɓi hanyoyin ta hanyar tsarin sauya bango, da'irori biyu, ko ka'idar sarrafawa?

• Za a iya dimmed hasken ƙasa da ayyukan tabo da kansu (ko kawai tare)?

• Idan rukunin yanar gizon yana amfani da 0-10V, DALI, ko sarrafawa masu wayo, menene haɗin gwiwar ke tallafawa?

4.2 Maɓalli daban-daban: hanya mafi sauƙi don tsabtace yanki

Idan sararin samaniya yana buƙatar rabuwa ta gaskiya-hasken yanayi a kan wani wuri ɗaya, ƙararraki a kan wani - keɓaɓɓen kayan aiki sau da yawa suna sa fahimtar tsarin zoning mafi haske:

• Kewaya ɗaya (ko tashar sarrafawa) don hasken wuta

• Kewaya/tashar ta biyu don fitillukan tabo

Pro Tukwici : Nemi zanen waya / sarrafawa da wuri. Yana hana 'mun zaci zai iya' mamaki a matakin samfurin.

5. Ma'auni na kimantawa 3: Gudanar da haske da jin dadi na gani

Ikon haskakawa shine inda yawancin '' yayi kyau akan takarda '' fakitin hasken wuta ba a ƙi su ba.

Fitilar 2-in-1 na iya zama kyakkyawa a nan idan ƙirar gani ta kare tushen hasken da kyau. Amma tunda duka ayyukan biyu suna rayuwa a cikin buɗaɗɗiya ɗaya, kuna dogara ga zaɓin ƙirar ƙirar samfur ɗaya.

Tare da kayan aiki daban, zaku iya haɗawa da gangan:

• ƙaramin haske na gani na ƙasa don hasken gabaɗaya, da

• kunkuntar, lafazin na gani na gani don karin haske.

Idan abokin cinikin ku yana ƙayyadaddun ofisoshi, tambayi ko suna da manufa ta ta'aziyya (ayyukan da yawa suna nuni da makasudin UGR kamar UGR <19, dangane da aikace-aikacen). Idan ba za ku iya tabbatar da aikin haske ba, kar ku yi alkawari.

6. Sharuɗɗan kimantawa 4: Zaɓin CRI (CRI 80 vs CRI 90)

Ga masu siyan MOFU, CRI ba kasafai bane game da 'mafi girma shine koyaushe mafi kyau.' Yana game da zaɓar matakin da ya dace don yanayin amfani da gefe.

Gabaɗaya jagora ita ce:

• CRI 80 : sau da yawa ana la'akari da tushen tushen hasken kasuwanci na gaba ɗaya.

• CRI 90+ : wanda aka fi so don wurare inda daidaiton launi ya shafi tsinkaye da tallace-tallace.

Ledrise ya taƙaita jagorar aikace-aikacen a cikin sa Jagorar CRI , kuma Hyperlite yana ba da kwatancen mai da hankali kan siyarwa a cikin sa CRI 80 vs CRI 90 don jagorar hasken dillali.

6.1 Ka'idar mai rarrabawa mai amfani

• Zaɓi CRI≥80 don tituna, bayan gida, da hasken ofis na gaba ɗaya.

• Zaɓi CRI≥90 don nunin tallace-tallace, wuraren baƙi na jama'a, da kowane sarari inda sautunan fata ko launin fata ke da mahimmanci.

Idan aikin yana da buƙatu guda biyu, har yanzu kuna iya daidaita dangin daidaitawa yayin ba da zaɓuɓɓukan CRI guda biyu a cikin ƙimar.

7. Ma'auni na kimantawa 5: saurin shigarwa da ƙuntataccen rufi

Lokacin da kuke siyarwa cikin sauri-juya fit-outs, shigar lokaci siffa ce ta keɓancewa.

2-in-1 yana son rage nauyin daidaitawa:

• ƙananan wuraren rufi

• ƙananan salon datsa don daidaitawa

• mai yuwuwar karancin direbobi/bangarori don sarrafa su

Wuraren gyare-gyare na iya ƙara yawan aiki, musamman lokacin da rufin ya cika (HVAC, sprinklers, panels access) kuma kowane yanki dole ne a daidaita shi.

8. Ma'auni na kimantawa 6: Ayyukan sabis da TCO na dogon lokaci

Masu rarraba suna tunani a cikin dawowar, garantin garanti, da gunaguni na rukunin yanar gizo-ba kawai farashin farko ba. Matsalar da kuke ƙoƙarin gujewa tana da sauƙi: fakitin silin da yayi kyau sosai a wurin mikawa, amma ya zama mai maimaita kira saboda yanki ɗaya yana jin duƙuma, da tsauri, ko rashin daidaituwa daga tsari zuwa tsari.

2-in-1 na iya rage wuraren taɓawa na sabis (ƙaɗan abubuwan gyarawa). Amma idan abokin ciniki ya ɗauki yanayi da lafazin a matsayin keɓantaccen tsarin 'tsari,' suna iya gwammace daidaitattun kayan gyara daban.

Tambayoyin da za a tambayi masana'anta ta kowace hanya:

• Menene tsarin maye gurbin (module vs full fixture)?

• Yaya ake sarrafa daidaiton launi a cikin batches?

• Wane takaddun da aka bayar tare da samfurori (fayil IES, takamaiman direba, zanen waya)?

9. Wanene ya kamata ya zaɓa?

Idan kuna yanke shawara tsakanin samfurin haske mai haske na 2-in-1 da gyare-gyare daban-daban, yi amfani da yanayin da ke ƙasa don guje wa ƙayyadaddun ƙididdiga (ko ƙasa-ƙasa) tsarin rufin.

9.1 Zaɓi wuri mai hawa 2-in-1 + ƙasa lokacin:

• Aikin yana buƙatar rufi mai tsabta tare da ƙananan sassa.

• Mai siye yana son ƴan kamannun zaɓaɓɓu (hanyoyi na CCT +) ba tare da yin aiki mai nauyi ba.

• Abin da ake bukata shine 'ƙara zurfin,' ba ' haskaka haske ba.

9.2 Zaɓi keɓaɓɓen fitilun ƙasa + fitillu lokacin:

• Mai zanen yana buƙatar buƙatu mai zaman kanta da canje-canjen shimfidar wuri akai-akai.

• Aikin yana buƙatar tsattsauran rabe-rabe da dimming mai zaman kansa.

• Wurin yana da mahimmancin launi (kayan kasuwa mai girma, gidajen tarihi) kuma dole ne a daidaita na'urorin gani a kowane rawa.

10. Inda KEOU Lighting ya dace (tsaka-tsaki, mai amfani)

Idan kuna gina daidaitaccen kunshin don ayyukan kasuwanci, KEOU Lighting zai iya tallafawa tsarin gine-ginen 2-in-1 wanda ya haɗu da tsakiyar tsakiyar haske tare da tasirin haske mai haske na hex-reflector kewaye.

Don tunani, duba KEOU Lighting's main site a KEOU Lighting da ra'ayi / samfurin shafi mai alaƙa don a saman kafa tabo saukar haske.

11. FAQ

Q1: Shin 2-in-1 na iya maye gurbin duka na yanayi da hasken lafazin?

Wani lokaci. Yana aiki mafi kyau lokacin da abin da ake bukata ya kasance matsakaici kuma makasudin shine tsaftataccen tsarin rufi. Idan kuna buƙatar ƙaƙƙarfan, madaidaitan fitattun bayanai, fitilun fitulu daban-daban galibi suna da sauƙin kunnawa.

Q2: Wane kusurwar katako zan zaɓa?

Fara da aikin: fiɗaɗɗen katako don cika gabaɗaya, ƙunƙun katako don lafazin. Yi amfani da zaɓuɓɓukan katako na masana'anta don dacewa da tsayin rufi da wuraren da aka sa gaba, da kuma buƙatar na'urar daukar hoto idan aikin ya kasance takamammen tuƙi.

Q3: Ana buƙatar CRI 90 koyaushe don ayyukan kasuwanci?

A'a. CRI 80 na kowa ne ga yankunan gabaɗaya, yayin da CRI 90+ ya fi daraja inda launi ke shafar kwarewa ko tallace-tallace - nunin tallace-tallace, wuraren baƙi na jama'a, da kuma ɗakunan ajiya.

Q4: Ta yaya zan kimanta 'hanyoyin haske uku' a cikin ƙirar 2-in-1?

Tambayi yadda ake zaɓar hanyoyin (jeri na sauyawa, da'irori biyu, ko yarjejeniya) da kuma ko za'a iya sarrafa hasken ƙasa da ayyukan tabo da kansu.

Q5: Menene zan nema tare da samfurin?

Samfurin ya kamata ya zo tare da zane na wayoyi, zaɓuɓɓukan direba / sarrafawa, zaɓin katako/CCT/CRI, da (idan an zartar) fayilolin hoto.

12. Matakai na gaba: sami samfurin + ƙididdiga za ku iya tsayawa a baya

Idan kuna son kimanta tabo mai hawa 2-in-1 + ƙasa don aikin SA na gaba, nemi samfurin da zance tare da zaɓin CCT da kuka fi so (3000K/4000K/6500K) , CRI manufa (≥80 ko ≥90) , da zaɓin kusurwar katako da kuke son gwadawa.

Za ku iya inganta tambayoyin guda biyu waɗanda suka fi dacewa kafin ku aiwatar da kunshin rufi: Shin sararin samaniya yana jin dadi ga mutanen da ke amfani da shi-kuma halin kulawa ya dace da ƙayyadaddun bayanai a rana ɗaya ba tare da sake yin aiki ba?