Die-Cast Aluminum LED Lissafin Sayayyar Hasken Ruwa don Ayyukan UAE

Siyan fitulun ruwa na waje don ayyukan UAE ba kawai game da wutar lantarki da farashi ba ne. Kayan gidaje da kayan rufin gaba suna shafar sarrafa zafi kai tsaye, kwanciyar hankali, juriyar lalata, da kuma yadda hasken wuta yake kama da yin bayan shekaru na rana, ƙura, da ruwan sama..

Wannan jagorar ya rushe dalilin da ya sa gidaje masu ƙyalƙyali na aluminium + haɗe- haɗe na gilashi ya zama ruwan dare a cikin fitilolin ambaliyar ruwa-kuma, mafi mahimmanci, abin da mai siye ya kamata ya tabbatar kafin amincewa da mai sayarwa.

1. Fara da gaskiyar wurin aiki (UAE/Gulf)

Kafin ka kwatanta masu samar da kayayyaki, daidaita kan yanayin da yawanci ke haifar da gazawar da ba a kai ba:

• Babban yanayin yanayi (danniya mai zafi da rage darajar lumen da sauri idan ba a sarrafa zafi da kyau)

• Kura da yashi mai kyau (hadarin shiga; nauyin kulawa)

• Ƙarfin rana / bayyanar UV (tsufawar ruwan tabarau da canza launi)

• Ruwan sama da iska ke haifar da wanki (matsalolin ingancin hatimi)

• Fasa gishirin bakin teku (idan an zartar) (yana haɓaka lalata)

Idan ba ku rubuta waɗannan sharuɗɗan a cikin RFQ ɗinku ba, za ku ƙarasa kwatanta alamun 'IP66' da jimlolin tallace-tallace maimakon dorewa na gaske.

2. Die-cast aluminum gidaje: abin da yake taimaka da-da abin da za a duba

Gidajen aluminium da aka mutu-sifa yana da kyau don siye saboda yana iya haɗa tsari + zafi yaɗa + filaye mai rufewa zuwa wani yanki mai tsauri.

2.1 Amfani 1: Mafi kyawun hanyar thermal (ƙananan haɗarin hasara na farkon lumen)

LEDs har yanzu suna samar da zafi. Idan wannan zafi ba zai iya motsawa daga allon LED ba a cikin gidaje da iska, za ku ga raguwar darajar lumen da sauri da haɗarin gazawa mafi girma.

Die-casting yana sauƙaƙa don gina gidaje guda ɗaya tare da haɗaɗɗen lissafin fin fin da daidaitattun wuraren tuntuɓar juna, wanda shine dalili ɗaya da ake amfani da gidaje masu mutuƙar mutuƙar aluminium don kayan aikin LED. Neway Precision yayi bayanin dalilin kula da thermal a cikin bayyaninsa na fa'idodin aluminum mutu simintin gyare-gyare a cikin hasken LED.

Duban mai siye: Nemi shaidar ƙira ta thermal da ke da alaƙa da yanayin yanayin ku (ba kawai 'ƙarar zafi mai kyau') ba. Misalai sun haɗa da yanayin gwajin zafin jiki, cikakkun bayanan jeri na direba, da ko ƙirar mahalli yana goyan bayan ingantaccen aiki a cikin kayan aiki mai zafi.

2.2 Fa'ida 2: Kwanciyar kwanciyar hankali (filayen rufewa suna tsayawa daidai)

Hatimin waje ya dogara ne akan abubuwan da suka dace da juna da kuma matsawar gasket tsayawa tsayin daka akan lokaci. Matsugunin simintin simintin gyare-gyare na iya rage damar gurɓacewar gidaje wanda ke haifar da ƙananan gibi.

Duban mai siye: Nemo cikakkun bayanan rufewa: kayan gasket, wurin sanya gasket, ƙirar shigar da kebul, da yadda aka manne gilashin gaba.

2.3 Amfani 3: Dorewa don jigilar kaya da sarrafa shigarwa

Ƙungiyoyin sayayya galibi suna yin la'akari da lalacewar da ake yi. Matsakaicin matsuguni ba shi da yuwuwar lalacewa yayin jigilar kaya, motsin sito, da shigar da wurin.

Duban mai siye: Tambayi abin da mai siyarwar ya yi don rage lalacewa ta hanyar wucewa (kwali, gwajin juzu'i, wadatar gilashin, da kuma yadda ake sarrafa da'awar).

3. Gilashin zafin fuska murfi: inda ya yi nasara-da kuma inda ba ya yi

Murfin gaba ba kayan kwalliya ba ne. A tsawon lokaci, yana rinjayar fitowar haske, ingancin katako, ƙoƙarin tsaftacewa, da kuma tsinkayen inganci.

3.1 Fa'ida 1: Tsaftar gani na dogon lokaci a cikin yanayin zafi, rana

Idan aka kwatanta da robobi da yawa, gilashin yana ƙoƙarin kiyaye tsabta mafi kyau a ƙarƙashin bayyanar UV na dogon lokaci. A cikin sharuɗɗan siye, wannan yana rage haɗarin 'da kyau a shigar, sannan ya sami hazo/rawaya daga baya' haɗarin.

Revolve LED yana taƙaita kasuwanci mai amfani a cikin sa gilashin zafi da kwatankwacin ruwan tabarau na polycarbonate (ko da yake yana magana game da fakitin bango, dabarar ruwan tabarau-kayan abu iri ɗaya ne).

3.2 Fa'ida 2: Tsayawa juriya (tsayawa da riƙewar lumen)

Kura da tsaftacewa na iya tayar da kayan ruwan tabarau masu laushi. Scraving yana ƙara watsawa kuma yana iya rage haske mai amfani a kan lokaci.

Duban mai siye: Tambayi game da shawarwarin tsaftacewa kuma ko mai siyarwa yana da jagora don mahalli masu ƙura (misali, bushewar gogewa vs tsabtace rigar).

3.3 Amfani 3: Juriya mai zafi a fuskar gaba

Don fitilolin ruwa mai ƙarfi, kwanciyar hankali na zafin fuska na gaba yana da mahimmanci. Gilashin gabaɗaya yana sarrafa zafi sosai idan aka kwatanta da robobi da yawa.

3.4 Ciniki: Tasirin juriya vs polycarbonate

Polycarbonate yawanci yana samun nasara don juriya mai ƙarfi. Idan aikin ku yana da haɗari-mai haɗari ko fallasa ga tasirin tarkace akai-akai, yana da kyau a kimanta ko gilashin da ke da zafi yana karɓa-ko kuna buƙatar ƙarin kariya (masu gadi) ko dabarun ruwan tabarau na daban.

Pro Tukwici : Bi da zaɓin ruwan tabarau azaman yanke shawara mai haɗari , ba akwati ta musamman ba. Idan karya shine babban haɗari, polycarbonate na iya zama zaɓi mafi aminci; idan tsufa na UV da tsabta na dogon lokaci sune babban haɗari, gilashin zafin jiki yakan yi nasara.

4. IP66: abin da a zahiri yake nufi ga masu siye (da abin da baya)

Yawancin masu siye suna ganin 'IP66' kuma suna ɗauka ' cikakken mai hana ruwa.' Ba abin da lambar ta ce ba ke nan.

Takaitaccen taƙaitaccen tsarin IEC 60529 Ingress Kariya ya bayyana cewa IP66 yana nuna ƙura mai ƙura (6) da kariya daga jiragen ruwa masu ƙarfi (6) - ba ci gaba da nutsewa ba. Duba cikin An bayyana ƙimar ƙimar IP (IEC 60529) , da kuma IEC 60529 Jagorar ƙimar IP don ƙarin mahallin.

4.1 Tasirin sayayya

• IP66 yana da ma'ana don ruwan sama na waje da bayyanar wanki.

• IP66 ba alƙawarin ba ne cewa an warware kowane maƙasudin rauni (glandan igiyoyi, membranes na iska, shimfidar ɗakin direba, sarrafa iska).

• Na'urori biyu na iya zama 'IP66' amma suna da bambanci sosai bayan watanni na hawan keke.

Duban mai siye: Tambayi ainihin abin da aka gwada, kuma nemi takaddun gwaji da suka yi daidai da da'awar kariyar.

5. Yanayin zafin aiki: yadda ake tantance shi ba tare da zato ba

Kun nemi haɗawa da kewayon zafin aiki - kuma wannan yana da wayo, musamman don shigarwar waje na UAE. A cikin ƙayyadaddun yare, ana rubuta wannan azaman aikin kewayon zafin jiki na LED hasken ambaliya (tare da mahallin gwaji).

Kuskuren yana buƙatar lamba ba tare da ayyana mahallin ba.

5.1 Abin da za a haɗa a cikin RFQ ɗinku

Tambayi mai kaya zuwa yanayin yanayin zafin aiki tare da:

• Kewayon zafin yanayi (ba ma'auni kawai ba)

• Ko kewayon ya shafi cikakken haske (gidaje + direba) a ci gaba da aiki

• Halin ɓatanci (abin da ke faruwa a babban yanayi: rage fitarwa, rufewar kariya, ko gajeriyar rayuwa)

• Sharuɗɗan gwaji: yanayin hawan hawa, zato kwararar iska, da ko an rufe shi

5.2 Abin da za a tabbatar

• Idan an yi nufin fitilar don amfani mai ƙarfi, tambayi yadda ake sarrafa zafin direba.

• Nemi shaidar cewa kewayon da ake da'awar yana da goyan bayan gwaji ko ingantaccen ƙira.

Gargaɗi : Idan mai siyarwa ya samar da 'tsarin zafin aiki' ba tare da mahallin gwaji ba (ko ya ci karo da ƙimar direban kansa), ɗauki shi azaman jan tuta.

6. Lissafin siyayya don fitilar LED mai walƙiya da aka kashe (tare da gilashin zafi)

Yi amfani da wannan azaman kayan aikin kwatancen aiki lokacin zaɓen zaɓuka. Idan RFQ ɗin ku ya faɗi a sarari kayan gidaje na LED ambaliya haske (misali, aluminium da aka kashe vs karfen takarda) da ruwan tabarau/kayan murfi (misali, gilashin zafi da polycarbonate), kwatancen mai siyarwa ya zama mafi sauƙi-kuma ƙarin kariya.

6.1 A) Kayayyaki da gini

• An kayyade gidaje a matsayin aluminum da aka kashe (ba 'aluminum' gabaɗaya ba).

• An ƙayyade murfin gaba azaman gilashin zafi (kuma an kwatanta kauri / hanyar riƙewa).

• An bayyana tsarin jiyya / sutura (mahimmanci ga juriya na lalata).

Misalin yadda mai kaya zai iya kwatanta wannan haɗin: KEOU's 'Launuka DOB LED Fitilar Ambaliyar' kwatankwacin kayan a sarari yana ambaton jikin aluminum da aka mutu da gilashi.

6.2 B) Rufewa da kariyar shiga

• An bayyana ƙimar IP a sarari (misali, IP66 LED ambaliya ).

• An kwatanta hanyar rufewa (gasket, hanyar matsawa, shigar da kebul).

• Mai sayarwa zai iya bayyana inda kasawa yakan faru da kuma yadda ƙirar su ke rage haɗari.

Don ma'anar nunin samfur-iyali, duba KEOU LED ambaliya jerin bayyani.

6.3 C) Gudanar da thermal (direban amincin shiru)

• Mai bayarwa na iya yin bayanin hanyar thermal daga allon LED zuwa gidaje.

• Siffofin nutsewar zafi suna aiki (ba kawai fins na ado ba).

• Ana magance wurin sanya direba da bayyanar zafi.

6.4 D) Ƙimar zafin jiki (aikin da ya dace)

• Ana ba da kewayon zafin aiki mai aiki tare da mahallin (na yanayi, hawa, derating).

• Mai siyarwa yana goyan bayan yanayin shigarwa mai zafi mai dacewa da rukunin yanar gizon Gulf.

6.5 E) Bayan-tallace-tallace da daidaito tsari (gaskiya mai rarrabawa)

• Share wuraren bincike na QC (kayan da ke shigowa, taro, binciken rufewa).

• Stable BOM iko (don haka tsari-zuwa-tsari yayi daidai).

• Samuwar kayayyakin gyara da tsarin tallafi (musamman don gilashi).

7. Jajayen tutoci waɗanda ke ƙara yawan kuɗin mallakar ku

• Tambarin 'IP66' ba tare da cikakken bayanin ƙirar hatimi ba.

• Ba a ambaci yadda mai kaya ke hana tsufan ruwan tabarau ba (ko kayan ruwan tabarau ba a sani ba).

• Gidajen da aka siffanta shi kawai da 'aluminum' ba tare da hanyar masana'anta ba (die-cast vs sheet metal vs extrusion).

• An bayyana kewayon zafin aiki mai aiki ba tare da mahallin yanayi/gwaji ba.

8. Matakai na gaba

Idan kuna son yin jerin sunayen da sauri ba tare da ƙara haɗarin dawowa ba, tattara bayanai guda uku kuma aika su zuwa ƙungiyar injiniyoyi masu kaya:

1. Yanayin shigarwa (zafi, kura, fallasa gishiri a bakin teku)

2. Matsayin IP da ake buƙata (IP66 ko mafi girma idan yanayin amfanin ku ya buƙaci)

3. Maƙasudin lumen/wattage da ƙuntatawa masu hawa

Idan kuna kimanta masu samar da kayayyaki yanzu, zaku iya yin la'akari da Hasken KEOU azaman mafari don fitilolin waje da tattaunawar OEM / ODM ta hanyar Hasken Ambaliyar Waje . Kayan samfurin