Flush Dutsen vs Surface Dutsen Rufi Fitilar: Jagorar Takaice

Idan kana samo fitilun rufi don aikin, 'Flush mount' da 'Surface mount' ana amfani dasu a hankali. Wannan ruɗani na iya haifar da ƙayyadaddun abin da ba daidai ba, sannan a sake yin aiki a kan shafin.

Ga hanyar da ta dace don yin tunani game da shi:

• Flush Dutsen : na'urar tana zaune sosai zuwa saman rufin tare da kadan ko babu tazari.

• Dutsen saman : babban nau'i mai faɗi don kayan aiki da aka ɗora akan saman rufin (gidaje a bayyane). Dutsen da aka zubar sau da yawa wani nau'in dutsen saman ne.

• A cikin RFQ da yawa, abin da masu saye ke nufi da 'Tunuwar sama vs Flush mount' shi ne ɗorawa sama da dutsen da ke fitowa (wanda galibi ake kira Semi-flush) . Hakanan zaka ga an rubuta shi azaman flush Mount vs Semi flush rufi haske.

Wannan shine kwatancen da wannan jagorar ke mayar da hankali akai, ta yin amfani da ma'auni waɗanda ke taimaka muku ɗaukar ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun bayanai waɗanda ba su dawo azaman dawowa ba.

Matrix yanke shawara mai sauri don jaye Dutsen rufin haske vs dutsen saman

Pro Tukwici : Idan RFQ ta yi amfani da jumlar 'Tunuwar saman', yi tambaya mai fayyace guda ɗaya: Shin kuna nufin ja-zuwa-rufi, ko jiki mai fitowa (Semi-flush)? Kalmomin tallace-tallace sun bambanta tsakanin masu kaya. Jagorar Gidan Ferguson kyakkyawan tunani ne don ma'anar flush vs Semi-flush: 'Flush Dutsen Lights vs. Semi-Flush Dutsen Fitilolin.'.

1. Tsaftacewa da tsayin rufi (hanyar da ta fi sauri don guje wa rashin dacewa)

Zaɓi ɗorawa mai ɗorewa lokacin da ɗakin kai ya matse ko yankin yana da yawan zirga-zirgar ƙafa. Yana kiyaye bayanin martaba kusa da rufin kuma yana rage damar lamba. Idan kuna rubuta ƙayyadaddun ƙayyadaddun ƙayyadaddun gidaje, corridors, ko dakunan wanka, wannan shine na yau da kullun mai walƙiya hasken rufi don zaɓin ƙaramin rufi.

Zabi dutsen da ke fitowa (Semi-flush) lokacin da kake da tsayin rufi don kiyayewa kuma kuna son ƙarin kayan ado, ko kuna son ɗan ƙaramin ɗaki don kwararar iska da shiga.

Idan kuna siyan ayyukan gauraye, dabarun SKU na iya zama mai sauƙi:

• ɗorawa ɗorawa don 'daidaita-tsawo' Apartment, corridors, wanki

• fitattun filaye don ɗakuna, lobbies, wurare masu fasali

2. Rufin rufi da gaskiyar wiring (kamfanin slab vs gypsum / rufin karya)

Wannan shine inda zaɓuɓɓukan dutsen saman sukan yi nasara a cikin ayyukan gaske.

• Kwankwan kwandon kwandon shara : sauye-sauyen wayoyi sun fi wuya a ɓoye. Ƙungiyoyi da yawa sun fi son mafita mai hawa sama maimakon aikin hutu mai zurfi.

• Gypsum / rufin karya : kuna samun rami mai wayoyi, wanda ke sa duka abubuwan da ba su da ƙarfi da na sama suna sauƙaƙe hanya da sabis.

Babban hanyar siyan kaya ba shine 'wanda ya fi kyau ba.' Shi ne: menene mai sakawa zai iya hawa lafiya, tare da hanyar wayar da kuke da ita? Wannan shi ne inda saman rufin rufin hasken shigarwa cikakkun bayanai ke da mahimmanci fiye da hoton kasida.

Gabaɗaya jagorar shigarwa kuma yana canzawa tare da substrate. Misali, Saint-Gobain Gyproc ya lura cewa ya kamata a dakatar da kayan aiki masu nauyi daga membobin tsarin maimakon hukumar gypsum kanta: 'Haske Rufin' (Gyproc).

3. Samun kulawa (direba sun kasa, kuma ba kwa son lalata rufin)

Don haɗakar da fitilun rufin LED, direba da haɗin kai galibi wurin sabis ne.

• Fuskar ruwa na iya zama daidaitaccen sabis, amma samun dama ya fi ƙarfi.

• Fitowar filaye yawanci suna ba da ƙarin izinin hannu don cire murfin da isa ga direbobi.

Idan kuna ƙayyadaddun ayyuka inda aka fitar da gyare-gyare kuma lokacin kan tsani ya yi tsada, rubuta wannan cikin takamaiman fakitinku:

• dole ne direba ya kasance mai isa ba tare da lalata rufin rufin ba

• wadatar direban da aka keɓe (ko an yarda da su)

• bayyanannen bayanin hanya don sauyawa

4. Haske da ta'aziyya na gani (UGR, ƙirar diffuser, sarrafa katako)

Nau'in hawa yana rinjayar fahimta, amma ba shine babban kullin sarrafawa ba.

Idan sararin samaniya yana da haske, mai da hankali ga RFQ ɗinku akan aikin gani:

• nau'in diffuser (opal, microprismatic, saƙar zuma)

• katako kusurwa / rarraba

• Manufar UGR idan ya dace

Dutsen da aka zubar tare da kyakkyawar gani na iya zama mai dadi. Dutsen saman da ke fitowa tare da tushe mai haske na iya haifar da rashin jin daɗi.

5. Muhalli da rufewa (bushewar cikin gida vs zafi / yankunan kura)

A cikin kicin, dakunan wanka, da wuraren bayan gida, abubuwan rufewa.

Ƙayyade ƙimar IP dangane da yanki da yanayin tsaftacewa. Wuraren da aka rufe suna sauƙaƙa don kiyaye tsabta saboda akwai ƙarancin fallasa da gaɓoɓin, amma amsar da ta dace koyaushe ita ce 'daidai da ƙimar IP ga muhalli,' ba 'flush yana da kyau koyaushe.'

6. Sarrafa, dimming, da flicker (inda ayyukan ke ƙonewa)

Idan an taɓa samun dawo da 'the fitilu flicker', kun riga kun sani: al'amarin yawanci shine tarin sarrafawa.

Mafi kyawun aiki mai sauƙi ne: daidaita direba zuwa ka'idar sarrafawa (yanke-lokaci/TRIAC, 0-10V, ko DALI). Haɗuwa da su yana haifar da dimming mara ƙarfi, buzzing, ko flicker.

Don ƙarin bayyani mai amfani na bambance-bambancen yarjejeniya da dalilin da yasa lissafin jituwa ke da mahimmanci, duba jagorar Kingseng: 'Jagorar Dimming LED: TRIAC 0-10V DALI PWM Yayi Bayani'.

Abin da za a tambayi masu kaya:

• goyan bayan ƙa'idar dimming (daidai)

• samfurin dimmer/mai sarrafawa masu jituwa (idan an yanke lokaci)

• da'awar aikin flicker (da hanyar gwaji, idan akwai)

7. Gudanar da thermal da tsawon rayuwa (ka guji 'ya yi kyau a rana ɗaya' ƙayyadaddun bayanai)

Abubuwan LED ba sa kasawa saboda guntuwar LED mara kyau. Suna kasawa saboda zafi da damuwa na direba suna haɓaka.

Ba kwa buƙatar over-injiniya wannan sashe a cikin RFQ, amma ya kamata ku nemi:

• Ƙimar yanayin yanayi (Ta)

• alamar direba / samfurin (ko aji na aiki)

• Makasudin kulawa da lumen (misali, L70) idan aikin yana da tsayin daka

Jikin-motsin saman sau da yawa suna da ƙarin ƙarar jiki don watsar da zafi, amma sakamakon ainihin duniya ya dogara da ƙirar ƙira.

8. Aesthetics da matsayi na aikin (inda ' Dutsen saman ' zai iya zama fa'ida)

Idan kuna siyarwa cikin ayyukan UAE, zaku ga mafi ƙarancin buƙatun 'tsaftataccen rufi' da ƙarin buƙatun kayan ado dangane da sashi.

Doka mai aiki:

• ɗorawa ɗorawa don shiru na gani da ƙananan rufin rufin asiri

• ɗorawa saman ƙasa lokacin da kuke buƙatar fasalin ƙira ba tare da motsawa zuwa pendants/chandeliers ba

Idan ƙungiyar ku tana buƙatar tsari mai maimaitawa, bi da wannan labarin azaman yadda za'a zaɓi nau'in jagorar hawa haske na rufi: tabbatar da ma'auni da sarrafawa da farko, sannan zaɓi nau'in nau'in.

9. RFQ Checklist: abin da za a tabbatar kafin ku kulle nau'in hawa

Aika wannan azaman ɓangare na kunshin BOM ɗinku don haka mai siyarwa ya faɗi abin da ya dace a karon farko.

1. Nufin hawa: ja-zuwa-rufi ko jikin da ke fitowa (rami-flush)

2. Rufi substrate: kankare slab / gypsum karya rufi / sauran

3. Wutar shigarwa da mitar: Ayyukan UAE yawanci 230V / 50Hz (tabbatar da daidaitattun rukunin yanar gizo). Maganar duban lantarki ta UAE: GoSwitchgear akan soket na UAE da daidaitattun wadata

4. Matsakaicin girman: diamita/tsawon tsayi + matsakaicin digo mai izini

5. Photometrics: lumens, CCT, CRI, kusurwa / rarrabawa

6. Maƙasudin haske (idan an zartar): Buƙatun UGR da nau'in gani

7. Direba da sarrafawa: kunnawa / kashewa kawai ko dimmable; yarjejeniya (TRIAC / 0-10V / DALI)

8. Ƙididdiga ta IP ta yanki (bushe, danshi, ƙura)

9. Shirin sabis: yadda ake samun dama ga direba da maye gurbinsa

10. Marufi da kayan aiki: direbobin kayan abinci, masu rarrabawa, shirye-shiryen bidiyo (idan an buƙata)

10. Matakai na gaba (idan kuna neman aikin UAE)

Idan kuna so, raba BOM / ƙayyadaddun ƙayyadaddun ku (nufin haɓakawa, masu girma dabam, CCT/CRI, ƙa'idar dimming, yankunan IP). Za mu iya sake duba shi kuma mu ba da shawarar ƙaya da ƙayyadaddun ƙayyadaddun sararin samaniya wanda ke guje wa matsalolin da aka saba: warware rikice-rikice, flicker kira-baya, da ciwon kai.

Kuna iya lilo Fitilar rufin KEOU don tsarin ƙirar rufin gama gari, kuma idan aikinku yana buƙatar zaɓin ƙasa mara ƙarfi, duba. KEOU fitilu na cikin gida.

11. FAQ

11.1. Shin ɗigon ruwa iri ɗaya ne da dutsen saman?

Ba daidai ba. 'Tunuwar saman' kalma ce ta laima don kayan aiki da aka ɗora akan saman rufin. 'Flush mount' yawanci yana nufin wurin da aka ɗora saman da ke zaune kusa da silin ba tare da tazari ko kaɗan ba. Dillali da kalmomin mai siyarwa sun bambanta, don haka yana da kyau a fayyace a cikin RFQ.

11.2. Dutsen mai ɗora iri ɗaya ne da wanda aka ajiye?

A'a. Gidan luminaire da aka ja da baya yana zaune a cikin kogon rufin, yayin da wani dutsen da aka ɗora a saman. Ma'anonin Ƙwararrun Injiniya (IES) suna taimakawa bayyana ra'ayoyin rataye da ra'ayi: Ma'anar IES: 'sharar da aka saka ko aka koma'.

11.3. Wanne ya fi dacewa don kiyayewa: ja ruwa ko tsattsauran shimfidar wuri?

Gabaɗaya, kayan aiki masu tasowa sun fi sauƙi don samun dama saboda akwai ƙarin izini don cire murfin kuma isa ga direbobi. Amma babban tsararren tsararren dutsen na iya zama mai amfani idan an shirya hanyar shiga.

11.4. Menene mafi yawan dalilin da ya fi dacewa fitilun rufin su yi flicker bayan shigarwa?

Rashin daidaiton direba / sarrafawa shine sanadi akai-akai. Gyara yawanci shine don tabbatar da ƙa'idar dimming (TRIAC, 0-10V, DALI) kuma amfani da direba da mai sarrafawa waɗanda aka gwada masu dacewa.